Xref: utzoo comp.unix.sysv386:1331 comp.unix.xenix.sco:527 comp.sys.ibm.pc.hardware:2337
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!att!iuvax!mikes
From: mikes@iuvax.cs.indiana.edu (Michael Squires)
Newsgroups: comp.unix.sysv386,comp.unix.xenix.sco,comp.sys.ibm.pc.hardware
Subject: SCO UNIX/ODT - Adaptec 154X[ab] as secondary controller
Keywords: SCO SCSI secondary
Message-ID: <65408@iuvax.cs.indiana.edu>
Date: 18 Oct 90 06:53:41 GMT
Organization: Indiana University, Bloomington
Lines: 16

Problem solved.  The Adaptec is set up as if it were to be the primary
controller (IO at 330, IRQ 11, DMA 5) but the BIOS is disabled.  I
suggest that the setup be tested first with the BIOS and floppy enabled
(if 1542[ab]) and the primary controller removed so that the on-board
utility can be used.

If there is no entry for a HD at ID 0, controller 0, LUN 0 the kernel fails
to build; apparently a physical hard drive is not required.



-- 

Mike Squires (mikes@iuvax.cs.indiana.edu)     812 855 3974 (w) 812 333 6564 (h)
mikes@iuvax.cs.indiana.edu          546 N Park Ridge Rd., Bloomington, IN 47408
Under construction: mikes@sir-alan@cica.indiana.edu