Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!wuarchive!udel!princeton!njsmu!mccc!pjh
From: pjh@mccc.uucp (Pete Holsberg)
Newsgroups: comp.dcom.lans
Subject: Re: Questions about StarGROUP Software
Message-ID: <1990Oct25.155557.27675@mccc.uucp>
Date: 25 Oct 90 15:55:57 GMT
References: <1990Oct16.173745.18064@mccc.uucp> <366@rick.att.com>
Reply-To: pjh@mccc.edu (Pete Holsberg)
Organization: The College On The Other Side Of Route One
Lines: 26

In article <366@rick.att.com> rkd@rick.UUCP (Rajeev Dolas) writes:
=In article <1990Oct16.173745.18064@mccc.uucp> pjh@mccc.uucp (Pete Holsberg) writes:
=>I'm in the process of installing StarGroup software (Version 3.2) on a
=>386 running SV/386 R3.2.2 and a bunch of Zenith PCs running DOS, and
=>have run into a couple of small things. 
=>
=>2.  The error messages section of the DOS guide mentions a "Simul-Task
=>Client S/W Installation & Config Guide."  Does this suggest that a
=>client must be running DOS -- even if it's under Simultask -- to be a
=>client for a StarGROUP server?
=>
=	Clients are of 2 types.  One strictly running under DOS and 
=	the other is the simultask client.  Simultask client needs
=	1) Simultask, 2) Simultask IEM tools program, 3) DOS, 4) simultask 
=	client interface program and 5) the regular DOS client program on
=	the UNIX machine.

I think you're telling me that a Simultask client is a UNIX machine!

=>Thanks,
=>Pete
-- 
Prof. Peter J. Holsberg      Mercer County Community College
Voice: 609-586-4800          Engineering Technology, Computers and Math
UUCP:...!princeton!mccc!pjh  1200 Old Trenton Road, Trenton, NJ 08690
Internet: pjh@mccc.edu	     Trenton Computer Festival -- 4/20-21/91