Xref: utzoo comp.mail.uucp:5363 comp.sys.pyramid:946
Path: utzoo!attcan!uunet!seismo!ukma!kherron
From: kherron@ms.uky.edu (Kenneth Herron)
Newsgroups: comp.mail.uucp,comp.sys.pyramid
Subject: Re: UUCP failure problems
Message-ID: <kherron.656385502@s.ms.uky.edu>
Date: 20 Oct 90 01:18:22 GMT
References: <131064@pyramid.pyramid.com>
Organization: U of Ky, Math. Sciences, Lexington KY
Lines: 16

csg@able (Carl S. Gutekunst) writes:

>In article <4590@rex.cs.tulane.edu> mb@rex.cs.tulane.edu (Mark Benard) writes:
>>We suddenly started getting quite a few "SIGNAL 1" failures on UUCP
>>transfers.... We are using the BSD universe UUCP... with OSx4.4c.

>That can mean only one thing: your modems are hanging up in the middle of the
>connection. Suspect a bad modem, or somebody messed with your telephone lines.

Or bad flow control.  I had a Tbit T1000 set to use Xon/Xoff both ways
between the computer and modem; UUCP would send ^S as part of the
protocol and the modem would dutifully shut up waiting for the ^Q that
never came.  This was only happening at slow speeds, which is why it took
me a week to figure it out...

Kenneth Herron