Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!apple!mips!public!techie
From: techie@public.BTR.COM (Bob Vaughan  techie@btr.com)
Newsgroups: comp.os.cpm
Subject: Re: Help with Kaypro 1 / Qume Sprint 5 / etc
Message-ID: <775@public.BTR.COM>
Date: 23 Oct 90 21:08:36 GMT
References: <9010221304.aa26662@crdec7.apgea.army.mil>
Organization: BTR Public Access UNIX, MtnView CA, Contact: cs@btr.com 415-966-1429
Lines: 20

The correct command line to configure the kaypro for serial printer
is STAT lst: = tty:
to reconfigure for a parallel printer it would be
STAT lst: = lpt:

You can also make it automatic on startup by using  CONFIG (if you have it)
BEWARE of changing  con: using CONFIG. test it first using STAT.
CONFIG saves the changes to the current boot disk.

at least on my kaypro 10, I can set con: = tty: and use a teletype or
a crt for a remote terminal.

you can use STAT dev: to show what is currently set for I/O.


Bob Vaughan - techie@well.sf.ca.us - {apple,pacbell,hplabs,ucbvax}!well!techie
            - techie@btr.com       - {fernwood,decwrl,mips}!btr!techie
1-415-856-8025 (My Robot)
Welcome My Son, Welcome To The Machine
I am me, I am only me, and no one else is me. What could be simpler?