Xref: utzoo comp.sys.ibm.pc:54491 comp.sys.ibm.pc.programmer:2531 comp.sys.dec:4326 comp.os.msdos.misc:507
Newsgroups: comp.sys.ibm.pc,comp.sys.ibm.pc.programmer,comp.sys.dec,comp.os.msdos.misc,comp.sys.msdos.programmer
Path: utzoo!censor!geac!maccs!maccs.dcss.mcmaster.ca!art
From: art@maccs.dcss.mcmaster.ca (Art Mulder)
Subject: reading 3.5inch PDP-11 (RT-11 Op.Sys) disks on IBM clone (MS DOS)
Message-ID: <2724A393.13764@maccs.dcss.mcmaster.ca>
Keywords: disk PDP-11 RT-11 IBM clone msdos
Sender: art@maccs.dcss.mcmaster.ca (Art Mulder)
Organization: McMaster University, Hamilton, Ontario, Canada
Distribution: na
Date: Tue, 23 Oct 90 20:09:55 GMT


Hello,
  I need to read 3.5inch disks, written on a PDP-11 using the RT-11
  operating system, on an IBM-clone (MS-Dos).

  I know it's doable, since the Norton Utilities Sector Editor can
  read the disk.

  Has anyone do this?  Can you point me towards any Code/programs
  that do this?  

  Lacking that, any pointers to writing my own ('C') program to
  read these disks?

  thanks for your help!
-----------
Art Mulder,                                      art@maccs.DCSS.mcmaster.ca
                                             ...!uunet!utai!utgpu!maccs!art
-- 
-----------
Art Mulder,                                      art@maccs.DCSS.mcmaster.ca
                                             ...!uunet!utai!utgpu!maccs!art