Path: utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!usc!rutgers!aramis.rutgers.edu!paul.rutgers.edu!makmur From: makmur@paul.rutgers.edu (Hanz Makmur) Newsgroups: comp.protocols.appletalk Subject: Re: Telnet on a PC with AppleShare/Localtalk board Message-ID: Date: 26 Oct 90 15:55:33 GMT References: <26293.27246dd0@kuhub.cc.ukans.edu> Organization: Rutgers Univ., New Brunswick, N.J. Lines: 21 >Has anyone sucessfully used Telnet in a PC with a LocalTalk board? >I have a Zenith PC (386) with a LocalTalk board and the AppleShare PC >software loaded in it. Next, I load the localtalk packet driver from >Katie Stevens at UCDAVIS. My machine locks up. If anyone has >suggestions, I'd like to hear them. Yes, I have tried it ona 386/25 compatible. I used the NCSA Telnet for PC using LocalTalk board from Apple. It works the first try..( ofcourse you have to configure the config.tel file) The driver was called ltalk.sys available some where in contribution directory in NCSA. I have also tried it on a TOPS FlashCard and this one did not work even the note says it should work. I spent a while on this and still get no result it hanged the PC. Any idea ? >thanks I hope it helps. Hanz Makmur