Path: utzoo!attcan!uunet!wuarchive!emory!hubcap!ncrcae!opusc!susie!samson From: samson@susie.cs.scarolina.edu (Kenneth Samson) Newsgroups: comp.protocols.tcp-ip.ibmpc Subject: HELP!! I need some help with my 3c505 board!! Message-ID: Date: 25 Oct 90 19:26:11 GMT Sender: usenet@opusc.csd.scarolina.edu (Usenet news system) Distribution: comp Organization: Univ. of South Carolina, Columbia Lines: 31 Nntp-Posting-Host: 129.252.11.12 Do anyone know anything about 3COM 3c505 ethernet boards?? The BBS I am in charge of currently recieved an old 3c505 from the CS department. The BBS is on a PC 286 6/10mHz machince. I tried using the 3c505 packet driver at :pub but I keep getting the following message: > Packet Driver for 3c505, version 7. > Portions copyright 1989, Krishnan Gopalan & Gregg Stefancik. > Clemson University Engineering Comp Ops. > Packet driver skeleton copyright 1988-90, Russell Nelson. > This program is free software; see the file COPYING for details. > NO WARRANTY; see the file COPYING for details. > > > Packet driver loaded at segment 2CCA > > *** Packet driver failed to initialize the board *** The board has no documents and the drivers documents are not very clear. Any help would be greatly appreciated. Thanks in advance, Ken Samson -- ============================================================================== Kenneth Samson | internet: samson%hobbes@usceast.cs.scarolina.edu -or- SysOp of USC-East BBS | samson%calvin@usceast.cs.scarolina.edu -or- | samson%susie@usceast.cs.scarolina.edu