Path: utzoo!attcan!uunet!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!swrinde!ucsd!nosc!crash!pro-graphics.cts.com!bobl
From: bobl@pro-graphics.cts.com (System Administrator)
Newsgroups: comp.sys.amiga
Subject: Re: Toaster Info...
Message-ID: <5167@crash.cts.com>
Date: 20 Oct 90 15:56:03 GMT
Sender: root@crash.cts.com
Lines: 23

In-Reply-To: message from mikep@hpmwtd.HP.COM

You forgot to mention that the Toaster requires 5meg of System RAM to run as
well as 5Meg of hard drive space just to install it and run it.  7 Meg of RAM
are suggested and you'd best have more than 5meg of hard drive space if you
want to save anything.

Lightwave 3D and the Modeler that goes with it will NOT run as stand alone
applications and require that you run them from the switcher which checks to
see if the Toaster is indeed installed in the machine, if not, nada.

When NewTek was asked about this and the possible conflicts in production
time, they told me that nothing was planned as far as changing this.  They
suggested to purchase another Toaster for 3D.

-- Bob
______ Pro-Graphics BBS  `It's better than a sharp stick in the eye!' ________

    UUCP: crash!pro-graphics!bobl         |         Pro-Graphics: 908/469-0049
ARPA/DDN: pro-graphics!bobl@nosc.mil      |       America Online: Graphics3d
Internet: bobl@pro-graphics.cts.com       |           CompuServe: RIP
_________                                                          ___________
          Raven Enterprises  25 Raven Avenue  Piscataway, NJ 08854