Path: utzoo!attcan!uunet!ogicse!uwm.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!jbn35564
From: jbn35564@uxa.cso.uiuc.edu (J.B. Nicholson)
Newsgroups: comp.sys.amiga
Subject: Re: DNET at 2400 baud
Keywords: DNET, DILLON, Amiga, 2400
Message-ID: <1990Oct23.030917.25756@ux1.cso.uiuc.edu>
Date: 23 Oct 90 03:09:17 GMT
References: <8069@darkstar.ucsc.edu>
Sender: news@ux1.cso.uiuc.edu (News)
Organization: University of Illinois at Urbana
Lines: 26

terry@helios.ucsc.edu (Terry Ricketts) writes:

>I enter 'dnet' on the Sun to open the fterm window. Then it just hangs. I
>can't find anything that would be speed dependent at that point.

>						Terry

Did you try specifying the new baud rate in either preferences or telling
DNet directly with the -bBAUD_RATE option (Amiga side)?

For instance:
1> run dnet -b2400

and using the same setup that works at 1200 baud?

>| Terry Ricketts			|  Internet: terry@helios.ucsc.edu
>| Senior Electronics Engineer		|  	     loel@helios.ucsc.edu
>| Lick Observatory Electronics Lab	|  Phone:    408-459-2110
>| University of Calif, Santa Cruz 	|

--
+----------------------------------------------------------------------------+
| "Earth destroyed by solar flare.  Film at eleven"  - The last nightly news.|
+----------------------------------------------------------------------------+
| jeffo@mrcnext.cso.uiuc.edu             These opinions are mine, that's all.|
+----------------------------------------------------------------------------+