Path: utzoo!attcan!uunet!decwrl!bacchus.pa.dec.com!buzzer.enet.dec.com!gerber
From: gerber@buzzer.enet.dec.com (Robert M. Gerber)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Citizen 140 printer
Message-ID: <1990Oct22.102438@buzzer.enet.dec.com>
Date: 22 Oct 90 14:29:24 GMT
References: <5174@crash.cts.com>
Sender: news@wrl.dec.com (News)
Reply-To: gerber@oldjon.enet.dec.com
Organization: Digital Equipment Corporation
Lines: 30

In article <5174@crash.cts.com>, denny@pnet01.cts.com (Dennis Anderson) writes:
|> A friend is considering buying a Citizen 140 printer but would like some
info
|> on it. ANY info will be greatly apreciated! Does this printer have a
|> Commodore suppoted printer driver for 1.3 and 2.0 dos?
|> ....
|>                                                Dennis Anderson

The EpsonQ driver from Commodore is the recommended driver for it.  Thr printer
has one density that may not be supported by the EpsonQ driver (As reported by
someone else...I have not needed 360*360 density...)
The EpsonQ driver does support color...  You may need to play in preferences
with the color adjustment and such.

The printer does work well,  I've seen some very good pictures from it.  The
draft mode is very readable & the letter quality looks almost like a real
typewrite especially when you you good typing paper.

The printer itself is a super set of the Panasonic 24 pin printer which is
a superset of the Epson series printers..

I hope this helps...

------------------------------------------------------------------------
---------
Robert M. Gerber		  UUCP:	...!decwrl!oldjon.enet!gerber
				  INET:	gerber@oldjon.enet.dec.com

Any opinions represented here are definetly not those of my employer.
Come to think of it, they may not be mine either!