Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!agate!shelby!portia.stanford.edu!jessica.stanford.edu!bard
From: bard@jessica.stanford.edu (David Hopper)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: GVP series II - does it need 1.3 ROM?
Message-ID: <1990Oct20.221647.12450@portia.Stanford.EDU>
Date: 20 Oct 90 22:16:47 GMT
References: <865@ki.UUCP> <1990Oct15.205233.13632@cs.utk.edu> <1990Oct16.002746.21061@portia.Stanford.EDU> <36@oregon.oacis.org>
Sender: news@portia.Stanford.EDU (USENET News System)
Distribution: usa
Organization: Academic Information Resources
Lines: 20

In article <36@oregon.oacis.org> jmeissen@oregon.oacis.org ( Staff OACIS) writes:
>
>The GVP Series-II board works fine with 1.2 ROMS. I have one of the new boards
>I never got 1.3 ROMS, and once I pulled the autoboot jumper the board worked
>just fine.
[...]
>in certain slots), bad RAM (try pulling the RAM and re-configuring the board jumpers),
>
>I can tell you for certain, it's NOT because you have 1.2 ROMS.
>-- 
>John Meissen ............................. Oregon Advanced Computing Institute

Thanks for all the help, to everyone who replied.
We pulled the RAM, and it worked fine.  I had heard from other people with a 
similar problem, and the same solution.  I don't *think* the RAM is bad.  
Anyone else have similar problems?
Dave Hopper      |      ///  Yesterday, CS.           | Academic Info Resources
                 |     ///    Today, Anthropology.    | Mac & UNIX Consultant
bard@jessica.    | \\\///                             | "Somebody get me a job
   Stanford.EDU  |  \XX/ Tomorrow... bleeding ulcers. | with a computer I LIKE"