Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!apple!agate!shelby!portia.stanford.edu!cavalier
From: cavalier@portia.Stanford.EDU (Jason Stinson)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: GVP series II - does it need 1.3 ROM?
Message-ID: <1990Oct21.065711.2763@portia.Stanford.EDU>
Date: 21 Oct 90 06:57:11 GMT
References: <1990Oct16.002746.21061@portia.Stanford.EDU> <36@oregon.oacis.org> <1990Oct20.221647.12450@portia.Stanford.EDU>
Distribution: usa
Organization: Stanford University Pest Control
Lines: 19


In article <36@oregon.oacis.org> jmeissen@oregon.oacis.org ( Staff OACIS) writes:
>
>The GVP Series-II board works fine with 1.2 ROMS. I have one of the new boards
>I never got 1.3 ROMS, and once I pulled the autoboot jumper the board worked
>just fine.

>I can tell you for certain, it's NOT because you have 1.2 ROMS.
>John Meissen ............................. Oregon Advanced Computing Institute

I never quite caught whether John has any RAM installed on his gvp or
not.  Does anyone out there have 1.2 ROMs, gvp series II, AND RAM installed
on it?  There have been at least three people who've posted with the above
configuration that didn't work.  It'd be awful nice if it did.

thanks,
jcs

p.s. Hopper should get a life...