Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!caen!hellgate.utah.edu!peruvian.utah.edu!u-mderha
From: u-mderha%peruvian.utah.edu@cs.utah.edu (Max Derhak)
Newsgroups: comp.sys.amiga.hardware
Subject: Help with Supra interface.
Keywords: scsi, hard disk, supra help
Message-ID: <1990Oct23.191907.3110@hellgate.utah.edu>
Date: 24 Oct 90 01:19:06 GMT
Expires: Noveber 15, 1990
Followup-To: u-mderha@peruvian.utah.edu
Organization: University of Utah CS Dept
Lines: 18

I have an amiga 500 that I recently purchased a used supra scsi interface from
a local computer store.  I purchased it to go with a scsi harddisk I also
recently purchased.  The problem I'm having is that the supra documentation
isn't that big on pin signals, and the harddisk came without a manual.
So here is the situation.  I have a 37pin DIN female connector on the
interface, and a 50pin male ribbon connector on the hard disk.  I'm pretty
sture the interface is scsi, and the hard disk is a ST277N.  Does anyone
out there have enough experience and time to help me out?  I have no
problems with making my own cables, I just don't know enough to logically
connect 37pins to 50.  (Are these standard connectors?)

Anyway your help will be appreciated.


==========================================================================
 Lekarz  THE //\/\    //| \ /  #  Max Derhak (u-mderha@ug.utah.edu) :^>
   od    \\ //    \  //-|  X   #  After all is said and done, a heck of
  Raju!   \X/      \//  | / \  o  a lot more is said and done. - Murphy