Path: utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!lavaca.uh.edu!menudo.uh.edu!nuchat!jeffn
From: jeffn@nuchat.UUCP (Jeff Noxon)
Newsgroups: comp.sys.apple2
Subject: A good way for CDEVs to load tools?
Message-ID: <29593@nuchat.UUCP>
Date: 21 Oct 90 20:41:54 GMT
Reply-To: jeffn@nuchat.UUCP (Jeff Noxon)
Organization: The Moribund Apple?
Lines: 18

I've finished writing my epic CDev and I would like to put the documentation
in the help window using TextEdit.  I've seen other CDevs do this
(BatteryBrain comes to mind) but not without problems.  I've read IIGS #58
and I am still without a solution.

BatteryBrain goes about this the wrong way, and as a result it has problems.
I won't go into it here since it is clearly explained in the technote.

For my purposes I only need TE active while the help dialog is being
displayed.  It's easy to start it up when the dialog is created, but is there
any way to know when the dialog is gone so the tool can be shut back down?

Jeff

-- 
Jeff Noxon                      | Stop complaining and do something about
jeffn@nuchat.sccsi.com          | it.  Really!
713/721-6820 (CDT) Houston, TX  |