Path: utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!haven!decuac!bacchus.pa.dec.com!rust.zso.dec.com!shlump.nac.dec.com!engage.enet.dec.com!ynotme.enet.dec.com!wallace
From: wallace@ynotme.enet.dec.com (Ray Wallace)
Newsgroups: comp.sys.atari.st
Subject: Re: HELP!! PRINTER PROBLEMS!
Message-ID: <2107@engage.enet.dec.com>
Date: 25 Oct 90 15:59:57 GMT
Sender: news@engage.enet.dec.com
Organization: Digital Equipment Corporation
Lines: 21


In article <1990Oct23.150838.2061@ncsuvx.ncsu.edu>, smisra@eos.ncsu.edu (SAURABH MISRA) writes...
>I am using a Panasonic 1091 printer with a 520ST and I am
>having problems printing with it, especially in graphics print
I use the same printer and it works just fine, contrary to a previous
followup, I've never had to put it in IBM ProPrinter mode.

>I do a screen dump (Pressing Alt and Help) I get a line of
>the screen followed by a line feed, so on paper you get the
The only thing I can think of that would do this is having the pixels per line
set wrong in the ST.  To fix it (and/or check it) go to the controll panel
desk accessory and click on "Install Printer", in the printer menu select 960
pixels/line. Now save the desktop (so you will always have the 960 setting)
and then try a screen dump.

---
Ray Wallace		
		(INTERNET,UUCP) wallace@oldtmr.enet.dec.com
		(UUCP)		...!decwrl!oldtmr.enet!wallace
		(INTERNET)	wallace%oldtmr.enet@decwrl.dec.com
---