Path: utzoo!utgpu!watserv1!watmath!att!att!emory!swrinde!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-pcd!hpcvra!prestonb
From: prestonb@hpcvra.CV.HP.COM (Preston Brown)
Newsgroups: comp.sys.handhelds
Subject: Re: 600 baud
Message-ID: <25590067@hpcvra.CV.HP.COM>
Date: 23 Oct 90 16:56:38 GMT
References: <27233c5b-3b5comp.sys.handhelds@hpcvbbs.UUCP>
Organization: Hewlett-Packard Co., Corvallis, OR, USA
Lines: 11


 
>With enough programming, you could get a 48 to receive 600 (since
>you can access the Rx pin directly)
>but as far as I'm aware, you can't access
>the Tx pin directly.

You can access the Tx pin by sending out a series of correctly
timed breaks.

Preston