Path: utzoo!attcan!uunet!midway!ncar!elroy.jpl.nasa.gov!usc!zaphod.mps.ohio-state.edu!uwm.edu!bionet!synoptics!unix!hplabs!hpda!hpcupt1!lpond
From: lpond@hpcupt1.cup.hp.com (Leland Pond)
Newsgroups: comp.sys.hp
Subject: Re: DAT on 9000/835
Message-ID: <-286539940@hpcupt1.cup.hp.com>
Date: 24 Oct 90 19:40:17 GMT
References: <1990Oct22.153242.5645@morrow.stanford.edu>
Organization: Hewlett Packard, Cupertino
Lines: 14

It should work just fine!
You have to set the HP-IB address switch to 8, that emulates an HP7980 at
HP-IB address of 3.
You can do cpio, tar, mt and dd.  These are all supported in the emulation
mode.

You should get an application note with your DDS.  The note is titled "Using
a Series 6400 Model 1300H DDS-Format Drive on an HP 9000 Series 600 and 800
with HP-UX 7.0".  The part number is C1511-90906.  All the information you
need in in the note.

Hope this helps,

	Lee Pond