Path: utzoo!attcan!uunet!intercon!news
From: kdb@macaw.intercon.com (Kurt Baumann)
Newsgroups: comp.sys.mac.comm
Subject: Re: Location of a TRUE vt100 emulator...
Message-ID: <27276B9F.41D8@intercon.com>
Date: 25 Oct 90 22:47:59 GMT
References: <7336.2726dae9@jetson.uh.edu>
Sender: usenet@intercon.com (USENET The Magnificent)
Reply-To: kdb@macaw.intercon.com (Kurt Baumann)
Organization: InterCon Systems Corporation, Herndon, VA
Lines: 29

In article <7336.2726dae9@jetson.uh.edu>, rcte2p@jetson.uh.edu (Paul S. Sears)
writes:
> I am looking for a decent vt220 or a TRUE vt100 emulation.  I currently use
> NCSA telnet to communicate to our VMS and to our Ultrix host.  I need a
> emulator that handles the vt102 subset with bold, underline, blink, plus the
> stadard vt100+ escape commands...  And it has to be a telnet program (no
> dial-out) and has to be compatable with either a Mac plus, a Mac II or a Mac
> IIci as I work on all three machines frequently... The machines are networked
> in appletalk and ethernet.  Thank you.
> 

Well I don't know of any PD software that will do what you need, and I only
know of two commercial packages that will do what you are looking for.

The Wollongong Group with their MacPathWay Access.  Will do true VT240/241
emulation.

InterCon Systems TCP/Connect II which will do true VT240/241 as well.

Or you could find a copy of some serial package that does VT220 emulation
and supports the CTB, then you could get either ASC's TCPack, or InterCon's
Telnet Driver/Tool.  Both of which are CTB connection tools.

Hope that helps.

--
Kurt Baumann                       InterCon Systems Corporation
703.709.9890                      Creators of fine TCP/IP products
703.709.9896 FAX               for the Macintosh.