Path: utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!mit-eddie!rutgers!cs.utexas.edu!sdd.hp.com!decwrl!sgi!silvlis.com!jimb From: jimb@silvlis.com (Jim Budler) Newsgroups: comp.sys.mac.hardware Subject: Re: Mac IIsi SIMMs Message-ID: <1990Oct23.065728.21323@silvlis.com> Date: 23 Oct 90 06:57:28 GMT References: Sender: usenet@silvlis.com (USENET news maint) Reply-To: jimb@silvlis.com (Jim Budler) Distribution: na Organization: Silvar-Lisco,Inc. Sunnyvale Ca. Lines: 24 In article bruner@sp15.csrd.uiuc.edu (John Bruner) writes: >Can one use any <= 100ns page mode SIMM's to upgrade a IIsi, or are >special low-profile SIMM's required? Any 100ns or faster, fast page mode SIMMs. The SIMMs are adjacent to the 512k ROM SIMM and it is *not* low profile, so I doubt if you need to worry about low profile. I took the 1 Meg SIMMs out of the MacRescue board in my 512ke and they worked just fine. They were just 100ns generic PC SIMMs picked up at a swap meet. They even have 9 bits each. >-- >John Bruner Center for Supercomputing R&D, University of Illinois > bruner@csrd.uiuc.edu (217) 244-4476 jim -- __ __ / o / Jim Budler jimb@silvlis.com | Proud / / /\/\ /__ Silvar-Lisco, Inc. +1.408.991.6115 | MacIIsi /__/ / / / /__/ 703 E. Evelyn Ave. Sunnyvale, Ca. 94086 | owner