Xref: utzoo comp.sys.misc:3049 comp.sys.ibm.pc.hardware:2517 comp.sys.ibm.pc.misc:2973
Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!jc58+
From: jc58+@andrew.cmu.edu (Johnny J. Chin)
Newsgroups: comp.sys.misc,comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Subject: Re: AST-3G Plus
Message-ID: <Eb9TS2O00Uw7Q743JM@andrew.cmu.edu>
Date: 24 Oct 90 20:20:18 GMT
Organization: Carnegie Mellon, Pittsburgh, PA
Lines: 22

I don't have an AST 3G Plus (the original long card) but I do have an AST
3G Plus II card (the short one).

The settings for CGA are as follows (taken from a board sitting on my desk):
SW1: 1-on, 2-on, 3-on, 4-off, 5-on, 6-off

Jumper:  there is only one on this board.     3xx +  jumped across pins to 3xx
                                                . +
                                              2xx

I hope this helps.
      __________                                          ___
     /          \                                    /   /    /-/ / /\/
    _/  /   /   /                                 __/.  /__  / / / / /
   /     /     / "Happy Computing ..."
  /           /                        Internet: Johnny.J.Chin@andrew.cmu.edu
 /  -------  /  4730 Centre Ave. #412  BITnet:   jc58@andrew
 \__________/   Pittsburgh, PA  15213  UUCP:    ...!uunet!andrew.cmu.edu!jc58
  Computer Dr.
______________________________________________________________________________

Disclaimer:   The views expressed herein are STRICTLY my own, and not CMU's.