Path: utzoo!attcan!uunet!wuarchive!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!hamblin.math.byu.edu!news From: smithw@hamblin.math.byu.edu (Wild Willy) Newsgroups: comp.sys.next Subject: Re: SCSI peripherals Message-ID: Date: 25 Oct 90 16:03:45 GMT References: <21291@orstcs.CS.ORST.EDU> Sender: news@hamblin.math.byu.edu (Usenet News) Distribution: comp Organization: Brigham Young University Lines: 28 In-Reply-To: jasmerb@prism.cs.orst.edu's message of 25 Oct 90 17:22:49 GMT Bryce gives us a disktab for a WREN V: #CDC Wren V 5.25" drive with 512 byte sector CDC 94181-15:\ :ty=fixed_rw_scsi:nc#1505:nt#15:ns#26:ss#1024:rm#3600:\ :fp#160:bp#0:ng#0:gs#0:ga#0:ao#0:\ :os=sdmach:z0#32:z1#96:\ :pa#0:sa#456300:ba#8192:fa#1024:ca#32:da#4096:ra#10:oa=time:\ :ia:ta=4.3BSD:\ :pb#456300:sb#130260:bb#8192:fb#1024:cb#32:db#4096:rb#10:ob=time:\ :ib:tb=4.3BSD: This will give you two partitions for the drive. If you want a single partition you could use: #CDC Wren V 5.25" drive with 512 byte sector CDC 94181-15:\ :ty=fixed_rw_scsi:nc#1505:nt#15:ns#26:ss#1024:rm#3600:\ :fp#160:bp#0:ng#0:gs#0:ga#0:ao#0:\ :os=sdmach:z0#32:z1#96:\ :pa#0:sa#586560:ba#8192:fa#1024:ca#32:da#4096:ra#10:oa=time:\ :ia:ta=4.3BSD: Then after you run buildisk, mount the new drive and comment out "b" partition lines from fstab.660, mtab and fstab. Now you can boot from your 600 MB disk (if that is what you wish to do). -Bill- -- __________________Prof. William V. Smith____________________ EMail: smithw@hamblin.math.byu.edu or uunet!hamblin.math.byu.edu!smithw SMail: Math Dept. -- 314 TMCB; BYU; Provo, UT 84602 (USA) Phone: +1 801 378 2061 FAX: +1 801 378 2800