Path: utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!usc!ucsd!pacbell.com!att!att!watmath!watserv1!ria!lri.uwo.ca
From: jd@lri.uwo.ca (J. Davis)
Newsgroups: comp.sys.sgi
Subject: Looking for some 'lite' advice
Message-ID: <9010251348.AA09342@?lri.uwo.ca>
Date: 25 Oct 90 13:48:22 GMT
Sender: LRuucp@ria.ccs.uwo.ca
Lines: 20
To: Comp.sys.sgi@ria.ccs.uwo.ca

Apoligies to those who read this message when the subject line
was 'none'. Trying again with a valid subjet line...)

 I have currently written a pair of programs (.cps, .c) 
 which, among other things, open a panel with a slider 
 and a button.  I can read the slider's value from the c side, 
 no problem. How can I SET the slider from the client side? 
 I suspect I'll need a SetSliderValue call. Where can I find 
 good documentation about these 'lite' calls? Also: how can I
 override ClientDrag so that NotifyUser is called continuously,
 not just when the button is released?

 Thanks for your help.
							jd
--------------------------------------------------------------
J. Davis, Lawson Research Inststitute | jd@mips.lri.uwo.ca
St. Joseph's Hospital                 | home:   (519) 657-4888
268 Grosvenor Street            	  | office: (519) 439-3271 x 4686
London, Ontario, Canada  N6A 4V2      |
--------------------------------------------------------------