Path: utzoo!attcan!uunet!bu.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!cs.utexas.edu!romp!auschs!awdprime!sabre.austin.ibm.com!robin From: robin@sabre.austin.ibm.com (Robin D. Wilson/1000000) Newsgroups: comp.unix.aix Subject: Re: modems on RT (AIX 2.2.1) Message-ID: <4010@awdprime.UUCP> Date: 24 Oct 90 17:46:47 GMT References: <598@vta.UUCP> Sender: news@awdprime.UUCP Reply-To: robin@reed.UUCP (Robin D. Wilson/1000000) Distribution: comp Organization: IBM AWD, Austin, TX Lines: 25 In article windley@cheetah.cs.uidaho.edu (Phil Windley/20000000) writes: >Either I don't understand the answer or you didn't understand the question. >You say to "send" those to the modem. That's the problem: sending ANYTHING >to the modem. I know how to get it into autoanswer mode, once I can send >things to it. Have you tried: cat < /dev/ttynnn # Where nnn == the tty number AT&D3 E1 Q2 &C1 ! ??? This should work if the port in "delayed" or "shared" (if it is enabled the port will be locked in /etc/locks, and these settings will not work correctly.) +-----------------------------------------------------------------------------+ |The views expressed herein, are the sole responsibility of the typist at hand| +-----------------------------------------------------------------------------+ |UUCP: cs.utexas.edu!ibmchs!auschs!sabre.austin.ibm.com!robin | |USNail: 701 Canyon Bend Dr. | | Pflugerville, TX 78660 | | Home: (512)251-6889 Work: (512)823-4526 | +-----------------------------------------------------------------------------+