Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!gatech!tut.cis.ohio-state.edu!n8emr!uncle!celebr!jbm
From: jbm@celebr.uucp (John B. Milton)
Newsgroups: comp.unix.sysv386
Subject: Re: UUCP protocols
Message-ID: <1990Oct18.071424.6988@celebr.uucp>
Date: 18 Oct 90 07:14:24 GMT
References: <17@jadpc.cts.com>
Organization: Celebrezze Committee
Lines: 40

In article <17@jadpc.cts.com> jdeitch@jadpc.cts.com (Jim Deitch) writes:
>Does anyone know how to specify a protocol to ISC 2.2 uucp?
>
>I want it to use the t protocol instead of the g protocol on a local
>connection, but can't remember how.

system time;r Device,p;c baud phone
            ^        ^ ^
            |        | `-- class
            |        `---- protocol set
            `------------- max retry time, for linear back-off

You can find out what protocols are available by polling the machine you're
interested in with uucico in debug mode (-x5):

...
Login Successful: System=osu-cis
msg-ROK
 Rmtname osu-cis, Role MASTER,  Ifn - 6, Loginuser - jbm
rmesg - 'P' got Pgextf
                 ^^^^^ protocols offered
wmesg 'U'g
         ^ we want g
Proto started g
*** TOP ***  -  role=1, setline - X
...

You can poll your own machine to find out what protocols YOU support.

BTW, what is the "t" protocol anyway?

The ,p;c stuff after the device name can go in the Systems or the Devices file

NOTE: if you are using a Telebit with uucp spooffing, the TB WILL ONLY DO g
protocol!!

John
-- 
John Bly Milton IV, jbm@uncle.UUCP, n8emr!uncle!jbm@osu-cis.cis.ohio-state.edu
(614) h:252-8544, w:469-1990; N8KSN, AMPR: 44.70.0.52; Don't FLAME, inform!