Path: utzoo!attcan!uunet!wuarchive!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!crdgw1!ge-dab!tarpit!bilver!bill
From: bill@bilver.UUCP (Bill Vermillion)
Newsgroups: comp.unix.sysv386
Subject: Re: Buying a 386 - questions
Keywords: 386 compatibility VGA
Message-ID: <1136@bilver.UUCP>
Date: 21 Oct 90 04:07:22 GMT
References: <16189@s.ms.uky.edu> <307@metran.UUCP> <1990Oct19.004956.1343@mccc.uucp>
Reply-To: bill@bilver.UUCP (Bill Vermillion)
Distribution: na
Organization: W. J. Vermillion - Winter Park, FL
Lines: 16

In article <1990Oct19.004956.1343@mccc.uucp> pjh@mccc.edu (Pete Holsberg) writes:
>I'm using a WD1007-WA2 ESDI controller and it works fine but I
>understand that the SV (SE?) version of that controller is better.

I have the WD1007-SE.  I also have a Maxtor 8760E.  This drive
requires this controller.  The SE is a 15Mb/sec ESDI controller, as
is the drive.  The drive wont run on a standard controller.

And if you drive is only a 10Mb/sec, I don't suspect you would see
any improvement, if it runs.  I found this the hardway trying to
put one of these into a stock ESDI controller situation.


-- 
Bill Vermillion - UUCP: uunet!tarpit!bilver!bill
                      : bill@bilver.UUCP