Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!uc!shamash!zeke From: zeke@shamash.cdc.com (Robert Scott) Newsgroups: comp.unix.sysv386 Subject: Crosstalk Mk.4 not working under VPIX Keywords: ISC Unix 2.2, VPIX, Crosstalk Mk. 4, tty port problems Message-ID: <27301@shamash.cdc.com> Date: 21 Oct 90 16:53:10 GMT Distribution: usa Organization: Control Data Corporation, Arden Hills, MN. Lines: 24 I'm having a problem getting Crosstalk Mk. 4 to run properly under VP/IX on Interactive Unix 2.2. I'm running on a Bell Technologies 16-mhz 386 (Multi-purpose Engine). Symptoms are that the input characters seem to come in too fast (running a 9600 baud connection through a CODEX modem), and the screen seems to lose chunks of text. An example: reading a man page using 'more' (connected to a Sun system), and most of a single screenful will be displayed, but about the lower 1/3 of the screen will be blank and the 'more ---' prompt is not displayed, but another partial screenful will be properly delivered when carriage return is pressed. I don't seem to have much better luck with DOS Kermit under VP/IX. Anybody on the net have any ideas on things to try? Thanks, Zeke -- ~~~~~~~~~~~ From the Shrine of the "Last Gasp of ETA Systems" ~~~~~~~~~~~~~ Extra zesty disclaimer: MINE! MINE! ALL MINE! Robert K. "Zeke" Scott internet: zeke@eta.cdc.com Control Data Corp, Supercomputer Support Group