Xref: utzoo comp.unix.xenix.sco:587 comp.unix.sysv386:1507
Path: utzoo!utgpu!watserv1!watmath!att!att!emory!wuarchive!uwm.edu!marque!dhump!mort
From: mort@dhump.lakesys.COM (Marty Wiedmeyer)
Newsgroups: comp.unix.xenix.sco,comp.unix.sysv386
Subject: Re: COM3 & COM4 on XENIX 2.3.2
Keywords: Serial ports, no multi port board :-(
Message-ID: <16@dhump.lakesys.COM>
Date: 24 Oct 90 00:01:20 GMT
References: <15@dhump.lakesys.COM>
Organization: Nubeat Communications, Milwaukee, WI
Lines: 20

In article <15@dhump.lakesys.COM> I wrote:

 [stuff about XENIX 386 2.3.2 GT not seeing COM3 & 4]

>SCO sez that COM3 & 4 aren't supported as serial devices. If you want
>more than 2 terminals/modems, you have to have a multi port card.

>But, he said that he remembers that some have done it! And that he'd
>"seen it on the net".

I've received the article The gentleman from SCO referred to. Thanks!

I'm willing to mail it to anyone else who's trying to get COM3 & 4
serial ports running. The method is _unsupported_ by SCO. Use at your
own risk. (I may risk it :-).

Marty Wiedmeyer

-- 
mort@dhump.lakesys.com 				uunet!marque!dhump!mort