Path: utzoo!attcan!uunet!aplcen!haven!adm!cmcl2!yale!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!julius.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!ac16460
From: ac16460@uxa.cso.uiuc.edu
Newsgroups: sci.electronics
Subject: VGA disp. HELP
Message-ID: <44900016@uxa.cso.uiuc.edu>
Date: 18 Oct 90 04:17:00 GMT
Lines: 24
Nf-ID: #N:uxa.cso.uiuc.edu:44900016:000:664
Nf-From: uxa.cso.uiuc.edu!ac16460    Oct 17 23:17:00 1990


I recently got a nice analog moniter at an auction, it has 5 inputs

	red
	green
	blue
	h sync / comp
	v sync

now hooked these lines to a friends VGA card; red to red, green to green,
blue to blue, h to h, and v to v.  

After turning the computer on, text could be read but the screen scrolled
vertically as if the vertical sync was not working, in fact there was 
no change if the vertical sync wire was removed completely. 

What is wrong, can it be fixed, can I use this moniter with VGA? 

The moniter is 19" and says 'VMI' on the front, and 'Mitsubishi Color
Display Monitor  C-6921P' on the inside.

Anthony Carrico       ac16460@uxa.cso.uiuc.edu      

u