Path: utzoo!attcan!uunet!samsung!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!wuarchive!sdd.hp.com!hplabs!hpfcso!hpfcdj!myers
From: myers@hpfcdj.HP.COM (Bob Myers)
Newsgroups: sci.electronics
Subject: Re: VGA disp. HELP
Message-ID: <17660126@hpfcdj.HP.COM>
Date: 22 Oct 90 19:14:53 GMT
References: <44900016@uxa.cso.uiuc.edu>
Organization: Hewlett Packard -- Fort Collins, CO
Lines: 20

>What is wrong, can it be fixed, can I use this moniter with VGA? 
>
>The moniter is 19" and says 'VMI' on the front, and 'Mitsubishi Color
>Display Monitor  C-6921P' on the inside.


The specs I have on the Mits C6921 say that it's for 28-35 kHz horizontal
and 40-70 Hz vertical, so it *should* work at the VGA timing (although it
may need some centering, etc. tweaks).  If the horizontal is locked in, then
I'd look for a control on the inside labelled "V FREQ" or something similar.
Also, check for a switch or jumper which might be used to configure the
monitor for "sync-on-green," which you're undoubtedly not supplying.

The "VMI" probably stands for "Vermont Microsystems," a small company which
manufactures PC-compatible graphics cards (not just VGA timing, though).


Bob Myers  KC0EW   HP Graphics Tech. Div.|  Opinions expressed here are not
                   Ft. Collins, Colorado |  those of my employer or any other
myers@fc.hp.com                          |  sentient life-form on this planet.