Path: utzoo!attcan!uunet!bu.edu!decwrl!wuarchive!psuvax1!rutgers!dynasys!alana!jaa
From: jaa@alana.UUCP (Alan Anderson [068])
Newsgroups: sco.opendesktop,comp.protocols.tcp-ip
Subject: SLIP Drivers SCO-ODT
Keywords: SLIP SCO-ODT
Message-ID: <5@alana.UUCP>
Date: 25 Oct 90 23:41:36 GMT
Followup-To: sco.opendesktop
Organization: United Dominion Buildings
Lines: 22


	I am trying to install a SLIP tcp-ip driver on a system that
is currently using a Western Digital 8003 for ethernet. They need to be used
concurrently. 

Steps Performed were:

	mkdev tcp

	added a SLIP driver
	defined the tty
	set the source and destination IP address
	set baud rate to 9600
	used the SLIP Interface default netmask

when the Kernel was re-linked and the system re-booted, it hung up at TCP
initialization. Please respond on sco.opendesktop, I don't trust MMDF yet.
	Thanks
	Alan Anderson (901) 762-6068
	United Dominion Building
	6000 Poplar Suite 400
	Memphis, TN 38119