Path: utzoo!attcan!uunet!bu.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hp-pcd!hplsla!tomb
From: tomb@hplsla.HP.COM (Tom Bruhns)
Newsgroups: comp.sys.amiga
Subject: Re: WeFax hardware interface
Message-ID: <5160104@hplsla.HP.COM>
Date: 27 Oct 90 02:24:19 GMT
References: <90294.193355JKT100@psuvm.psu.edu>
Organization: HP Lake Stevens, WA
Lines: 19

Well, I wasn't quite ready to post this, but since Kurt asked...

I expect to have a board set ready this weekend for Dave McM's Wefax
software.  It's a set because it'll have a parallel port pass-through
card with two connectors on it, and because of that will actually
work with a 1000, 2000 or 500 (3000 too???).  The interface circuit
will be on a separate board that can "piggyback" on the pass-through,
or can be mounted remotely (reasonably short cable).

I will be happy to make the layout available in XCad or LaserJet
format; I don't think I have a good way to do IFF of the size
required, but I'll take a look.  I am also willing to make a
_few_ board blanks; if it gets to be too big a deal, maybe we can
look for a board vendor to do them.

(Well, Dave, now I'm really committed ;-)  --  

Tom Bruhns
tomb%hplsla@hplabs.hp.com