Xref: utzoo comp.sys.amiga:70322 comp.sys.amiga.hardware:4278
Path: utzoo!attcan!uunet!munnari.oz.au!bruce!trlluna!rhea!aduncan
From: aduncan@rhea.trl.oz (Allan Duncan)
Newsgroups: comp.sys.amiga,comp.sys.amiga.hardware
Subject: Re: 1950 vertical jitter
Message-ID: <2412@trlluna.trl.oz>
Date: 28 Oct 90 23:11:21 GMT
References: <4042@rorschach.oakhill.UUCP>
Sender: news@trlluna.trl.oz
Lines: 17

From article <4042@rorschach.oakhill.UUCP>, by eric@oakhill.UUCP (Eric Quintana):

> As an originator of this thread, let me try to stave some of the
> 1950 monitor flaming.
> 
> I have solved the vertical jitter problem (I think).
> In a nutshell, I opened up the moniter and made an internal adjustment.

Does the interlaced scan work correctly with the new settings?  By this,
I mean that the odd and even scans are evenly placed above/below each
other, rather than having two lines close together, then a slight gap to
the next pair.

Allan Duncan	ACSnet	a.duncan@trl.oz
(03) 541 6708	ARPA	a.duncan%trl.oz.au@uunet.uu.net
		UUCP	{uunet,hplabs,ukc}!munnari!trl.oz!a.duncan
Telecom Research Labs, PO Box 249, Clayton, Victoria, 3168, Australia.