Path: utzoo!attcan!uunet!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu!greg
From: greg@ccwf.cc.utexas.edu (Greg Harp)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Memory Lists and Memory Attributes -- HELP!
Message-ID: <38792@ut-emx.uucp>
Date: 27 Oct 90 23:16:24 GMT
References: <38791@ut-emx.uucp>
Sender: news@ut-emx.uucp
Reply-To: greg@ccwf.cc.utexas.edu (Greg Harp)
Organization: The University of Texas at Austin
Lines: 15

In article <38791@ut-emx.uucp> I write:
>First, let me say that I have 3MB installed on the board.  When I boot up,
>I have 512K and 1.8MB Fast, which is correct.  Next, I use the "cram"
>utility that comes with the board, which adds the extra RAM.  I get a
>250K (or so) chunk at $0f0000 and a 1MB chunk at $800000.  I can't 
>use either of these...

Correction:  I have a 1MB chunk at $800000 and a 255K chunk at $f40000.
I don't know where I got $0f0000...

Greg
---------------Greg-Harp---------------greg@ccwf.cc.utexas.edu----------------
AMIGA! //  
      // Don't you just hate those long signature files?  I mean, there oughta
    \X/  be a law.  If I were in control, .sigs would get cut off if they were