Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!ub!dsinc!bagate!cbmvax!andy
From: andy@cbmvax.commodore.com (Andy Finkel)
Newsgroups: comp.sys.amiga.tech
Subject: Re: WShell 1.2 and AmigaDOS 2.0
Message-ID: <15516@cbmvax.commodore.com>
Date: 1 Nov 90 15:39:50 GMT
References: <3396@orbit.cts.com>
Reply-To: andy@cbmvax.commodore.com (Andy Finkel)
Organization: Commodore, West Chester, PA
Lines: 34

In article <3396@orbit.cts.com> koleman@pnet51.orb.mn.org (Kurt Koller) writes:
>
> 
>So I try WShell on the 2.0 Kick, mainly because I don't want to type "rx"
>before all the rexx commands.  And when I click the close gadget, WShell


set the script bit, and the shell will invoke an Arexx script properly
also.  (don't put an extention on it unless you happen to like
typing extentions)


>interprets it as a CTRL-\ whic is fine, but it wants FIVE clicks to the close
>gadget to close the window.  Any way around this?  I don't want to go back to
>CONMAN, because it doesn't open with a sizing gadget and without the
>"smart-refresh" window...

I believe you can use the standard CON: with Wshell.  I don't know if that
will let CTRL-\ act immediately, though.

>Kurt "Koleman" Koller - tcnet!orbit!pnet51!koleman

			andy


-- 
andy finkel		{uunet|rutgers|amiga}!cbmvax!andy
Commodore-Amiga, Inc.

"It is much easier to suggest solutions when you know nothing about the
 problem."

Any expressed opinions are mine; but feel free to share.
I disclaim all responsibilities, all shapes, all sizes, all colors.