Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!husc6!m2c!wpi.WPI.EDU!greyelf
From: greyelf@wpi.WPI.EDU (Michael J Pender)
Newsgroups: comp.sys.apple2
Subject: Re: Help with cable wiring
Message-ID: <1990Nov1.172109.5100@wpi.WPI.EDU>
Date: 1 Nov 90 17:21:09 GMT
References: <17163@thorin.cs.unc.edu>
Organization: Worcester Polytechnic Institute
Lines: 18

In article <17163@thorin.cs.unc.edu> ornat@iris.cs.unc.edu (Steven Ornat) writes:
>Need some advice for making a printer cable.
>
>Just bought a //e clone (Laser 128) and I would like to connect a
>parallel printer to it. What I need is the wiring from the normal
>parallel centronics connector to the DB-15 that is used on the rear
>of the  Laser 128.

When I bought my Laser a cable came with it for free that does parallel
to centronics.  Last I looked Laser sells one for about $25, but the connector
for the back of the laser is pretty non-standard if I remember right.

I have the tech documentation at home and can look it up, but you may
have already received a more promising reply.  If not, drop me a line.
-- 
---
Michael J Pender Jr  Box 1942 c/o W.P.I.   Part of this D- belongs to 
greyelf@wpi.bitnet   100 Institute Rd.     God...