Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!art100
From: ART100@psuvm.psu.edu (Andy Tefft)
Newsgroups: comp.sys.apple2
Subject: Re: Some observations
Message-ID: <90306.010630ART100@psuvm.psu.edu>
Date: 2 Nov 90 06:06:30 GMT
References: <jh4o+@ANDREW.CMU.EDU> <9011011645.AA13315@apple.com>
 <6550@plains.NoDak.edu>
Organization: Penn State University
Lines: 21

There's not all that much to the mini-assembler. There are
a few differences between the "old" mini-assembler and the one
that's in my //c.

The basic idea of the mini-assembler is if you type in
!addr:mnemonic operand
it will assemble one line at the specified address; to continue
you forgo the address and just use
! mnemonic operand
(i.e. a leading space). The OLD mini-assembler lets you do monitor
commands by preceding them with a $; my //c's doesn't. To exit
the OLD mini-assembler you do a
!$ff69g
but on my //c you just hit return on an empty line.

Oh, and $ are optional. all numbers are hexadecimal:-)

My //c's mini-assembler does support 65c02 opcodes, by the way.

There are no other commands in the old mini-assembler, but there
may be in the new.