Path: utzoo!attcan!uunet!jarthur!usc!sdd.hp.com!hp-pcd!hpcvra!rnews!hpcvbbs!akcs.jimcox
From: akcs.jimcox@hpcvbbs.UUCP (james e. cox)
Newsgroups: comp.sys.handhelds
Subject: Re: Poly ver. 3 for HP-28
Message-ID: <272d1663-3a5.1comp.sys.handhelds-1@hpcvbbs.UUCP>
Date: 30 Oct 90 06:40:06 GMT
References: <1990Oct18.200414.11473@ecn.purdue.edu>
Lines: 6

In an attempt to use the polynomial programs, I have been
unable to get them to work. I am new at programing and could use
some advice on these programs. The first question is if these programs
can be used on a 48SX. I was led to believe that the 48SX could use 
programs from the 28S. If I am wrong about this, please let me know.
The only programs in the bunch that would work were, Trim, Irt, L2A,
and Evply. Thank You.