Path: utzoo!attcan!uunet!timbuk!cs.umn.edu!msi.umn.edu!src.honeywell.com!sol.ctr.columbia.edu!zaphod.mps.ohio-state.edu!magnus.ircc.ohio-state.edu!news From: smsmith@hpuxa.ircc.ohio-state.edu (Stephen M. Smith) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: VGA graphics board driving Hercules mono monitor Keywords: VGA Hercules Message-ID: <1990Oct27.045942.22437@magnus.ircc.ohio-state.edu> Date: 27 Oct 90 04:59:42 GMT References: <6830@hub.ucsb.edu> Sender: news@magnus.ircc.ohio-state.edu Distribution: comp.sys.ibm.pc.misc Organization: The Ohio State University (IRCC) Lines: 42 Nntp-Posting-Host: hpuxa.ircc.ohio-state.edu In article <6830@hub.ucsb.edu> 6500boo@ucsbuxa.ucsb.edu (William Bushing) writes: >Yep, I came up with yet another question! > >Will the ATI VGA Wonder or Orchid ProDesigner II VGA graphics >adaptors drive a standard (ie HERCULES compatible) monochrome >monitor? According to the literature published by Orchid (Technical Specifications, 1990): "The ProDesigner II is register and BIOS-level compatible with EGA, CGA, MDA, and Hercules. It also supports all 17 standard VGA modes. In addition, the ProDesigner II supports the following extended modes: 3-132 column--16 colors; 640x400--256 colors; 640x480--256 colors; 800x600--16 colors; 800x600--256 colors; 1024x768--16 colors; 1024x768-- 256 colors. Compatible Monitors: Multi-frequency analog (e.g., NEC MultiSync, Sony, MultiScan, Nanao, etc...) Single frequency analog (e.g., IBM 8513, Zenith ZCM-1490) IBM 8514 Display or compatibles." If you need more specs on this board call EPS Technologies; they sent me seven pages of stuff on this board since they use it in their systems (that's where I got the info above). Of course I had to throw that last paragraph in. :-) Sorry, what I have about the ATI board doesn't answer your question. P.S. If your color monitor went down, you probably wouldn't be able to use your Hercules monitor anyway since the software you would be using would require color graphics. The board could provide that, but not to a mono monitor. In fact (somebody correct me if I'm wrong) you could fry your monitor if you sent the wrong frequencies to it. Also, your mono monitor might not even be connectable to the graphics board (because the board has a 15-pin analog connector). S. "Stevie" Smith \ + / ,,@ ircc.ohio-state. \ + / {7%*@,..":27g)-=,#*:.#,/6&1*.4-,l@#9:-) " edu> \ + / BTW, WYSInaWYG \ + / --witty.saying.ARC