Xref: utzoo comp.sys.mac.comm:1360 comp.sys.mac.hardware:6176 Path: utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!wuarchive!mit-eddie!bloom-beacon!eru!hagbard!sunic!mcsun!cernvax!chx400!ugun2b!ugsc2a!kanala From: kanala@sc2a.unige.ch Newsgroups: comp.sys.mac.comm,comp.sys.mac.hardware Subject: Re: Ethernet Card ID Message-ID: <282@sc2a.unige.ch> Date: 27 Oct 90 13:58:43 GMT References: <1990Oct18.190308.3678@cs.uoregon.edu> Organization: University of Geneva, Switzerland Lines: 37 In article <1990Oct18.190308.3678@cs.uoregon.edu>, petera@comix.cs.uoregon.edu (Peter Adamson) writes: > Hi Netters: > > We are seeking a utility that will obtain the ethernet card address > after the card has been installed in the Mac (so the user can't > see the label on the card). IBM versions come with diagnostic > software for this, as does Nuvotek(tm), other Mac cards do not > have this capability. > > I'm no Mac guru but I assume the ethernet address should be > available at some RAM addr. Does anybody know of a (preferably PD) > program that can get the address? > > Thanx in advance. > > ---------------------------------------------------------------------------- > | Peter Adamson > __ _ _ | Univ of Oregon > /_/( /_| | (petera@cs.uoregon.edu) > / _)/ | | > | They don't know what they don't know... > | - An Englishman, I believe > ---------------------------------------------------------------------------- > -- > ---------------------------------------------------------------------------- > | Peter Adamson > __ _ _ | Univ of Oregon > /_/( /_| | (petera@cs.uoregon.edu) NCSA Telnet does that. Menu Network, menuitem Show Network Numbers ..., shown are IP Number, EthernetNumber, Slot, Subnet Mask. NCSA Telnet is in public domain. Address: National Center for Supercomputing Applications, University of Illinois, Software Development - NCSA Telnet, 152 Computing Applications Bldg., 605 E. Springfield Ave., Champaign IL 61820, softdev@ncsa.uiuc.edu, softdev@ncsavmsa.bitnet Roman Kanala, University of Geneva, kanala@sc2a.unige.ch