Xref: utzoo comp.sys.mac.comm:1397 comp.sys.mac.hardware:6277
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!evax!utacfd!letni!mic!supernet!cluther
From: cluther@supernet.haus.com (Clay Luther)
Newsgroups: comp.sys.mac.comm,comp.sys.mac.hardware
Subject: Connecting Fastpath to Enternet: HOW TO????
Message-ID: <1990Oct30.054816.2587@supernet.haus.com>
Date: 30 Oct 90 05:48:16 GMT
Organization: Harris Adacom Corporation
Lines: 28


I am trying to install a Kinetics Fastpath gateway into a previously
existing ethernet.  Here is a simple diagram of what the inet look like.


                           Mac SE
                              |
--+------ Ether --------------+------------------ + --------
  |                                               |
  |                                            Fastpath
  |                                               |
Mac II=------=LaserWriter=----- LocalTalk --------+

Or in text, both the Mac SE and Mac II are on ethernet.  The Laserwriter and
the Mac II are on LocalTalk, as well.  The Fastpath gateway is connected to
ethernet and localtalk.

How can I access the Laserwriter from the Mac SE (or any other machine only on
the ethernet)?  Currently, the Mac II only sees the Laserwriter when the 
LocalTalk zone is choosen.  The Mac SE doesn't see the laserwriter at all.

I thought this was something the Fastpath could do.  Was I mistaken? 

-- 
Clay Luther, Postmaster          cluther@supernet.haus.com 
  Harris Adacom Corporation      postmaster@supernet.haus.com
  Voice:  214/386-2356           MS 23, PO Box 809022, Dallas, Tx 75380-9022
  Fax:    214/386-2159           Your mileage may vary.  Void where prohibited.