Xref: utzoo comp.sys.mac.hardware:6171 comp.sys.mac.system:1946 comp.sys.mac.programmer:18548 comp.sys.mac.misc:4850
Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!rpi!mts.rpi.edu!Garance_Drosehn
From: Garance_Drosehn@mts.rpi.edu (Garance Drosehn)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac.system,comp.sys.mac.programmer,comp.sys.mac.misc
Subject: Re: Hardware accelerators for the MAC
Message-ID: <}C6%5#&@rpi.edu>
Date: 26 Oct 90 23:28:25 GMT
References: <1990Oct25.202530.19164@jts.com>
Organization: Rensselaer Polytechnic Inst.
Lines: 23

In article <1990Oct25.202530.19164@jts.com> gil@jts.com (gil) writes:
> I have several questions about graphics accelerators for the Mac
> (Nubus). Hopefully somebody out there has some experience with these
> and can help out.
   ...etc...

While I'm sure you want all the opinions you can get, please pick one 
newsgroup and post your request-for-info there.  The whole idea of having 
multiple newsgroups is to split up the Mac traffic, and cross-posting the 
same message to all the newsgroups completely defeats that purpose.

Offhand I'd think this belongs in mac.hardware, and that newsgroup only.

This isn't meant to be nasty, but we all seem to be drifting to the point
that c.s.m.misc contains every message on any Macintosh topic, with cross-
postings to the other groups.  For me at least this gets rather irritating.
Given that I'm reading all the newsgroups anyway and using the hypercard
netnews reader stack to do it, I end up seeing the same messages in each
group.

Garance_Drosehn@mts.rpi.edu
ITS Systems Programmer
Rensselaer Polytechnic Institute; Troy, NY.  USA