Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!crackers!m2c!wpi.WPI.EDU!wpi!gshapiro From: gshapiro@wpi.wpi.edu (Gregory Neil Shapiro) Newsgroups: comp.sys.mac.programmer Subject: Re: LaserWriter without AppleTalk active Message-ID: Date: 2 Nov 90 17:13:06 GMT References: <1990Nov2.140336.15904@towernet.cc.bellcore.com> Sender: news@wpi.WPI.EDU (News) Organization: Worcester Polytechnic Institute, Worcester, MA 01609-2280 Lines: 17 In-Reply-To: chh2@hera.uucp's message of 2 Nov 90 14:03:36 GMT Nntp-Posting-Host: wpi.wpi.edu I do this myself. All you have to do is select the LaserWriter in the Chooser. It will tell you that AppleTalk will be active. Click Ok. Then Shut off AppleTalk. It will tell you to disconnect from the network. Click Ok. Then close the Chooser. When you print, it will still print with the LaserWriter driver. Just be sure to print to a disk file. Greg -- ____________________________________________________________________________ Gregory Neil Shapiro Gregory Neil Shapiro gshapiro@wpi.wpi.edu (130.215.24.1) Worcester Polytechnic Institute husc6!m2c!wpi!gshapiro 100 Institute Road, Box 1397 America Online/GEnie: GShapiro Worcester, Massachusetts 01609 ____________________________________________________________________________