Path: utzoo!attcan!uunet!mcsun!unido!ztivax!meth
From: meth@ztivax.UUCP (Wilhelm Methfessel)
Newsgroups: comp.unix.ultrix
Subject: Re: SLIP for Ultrix
Message-ID: <2456@ztivax.UUCP>
Date: 29 Oct 90 14:50:27 GMT
References: <1990Oct26.183137.938@uunet!unhd> <6806@tekgen.BV.TEK.COM>
Reply-To: meth@ztivax.UUCP (Wilhelm Methfessel)
Organization: Siemens AG, Munich, W-Germany
Lines: 19

In article <6806@tekgen.BV.TEK.COM> mike@puffin.USS.TEK.COM (Mike Ewan) writes:
  >In article <1990Oct26.183137.938@uunet!unhd> chuck@chuck.unh.edu (Chuck Grasso) writes:
  >>
  >>I am looking for a version of slip that will run under ultrix 3.X and 4.0,
  >>can anyone direct me to a copy?
  >
  >Install the ULXBASE400 subset (for Ultrix 4.0) and rebuild the kernel
  >with psuedo-device sl added to the config file.  From some comments in
  >this group I don't believe SLIP works in Ultrix 3.x, and I haven't
  >tried it myself.

We got a corrected driver module 'if_sl.o' from DEC and since then have a
running SLIP connection with ULTRIX 3.1C on a 5810.

-- 
Wilhelm Methfessel           UUCP:     uunet|mcsun!unido!ztivax!meth
Siemens AG, ZFE IO 2                   meth@ztivax.UUCP
8000 Muenchen 83             Internet: meth@ztivax.siemens.com
Otto Hahn Ring 6             Phone:    +49 89 6363894