Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!marque!dhump!mort
From: mort@dhump.lakesys.COM (Marty Wiedmeyer)
Newsgroups: comp.unix.xenix.sco
Subject: SCO XENIX 2.3.2 on i486
Message-ID: <18@dhump.lakesys.COM>
Date: 31 Oct 90 22:01:23 GMT
Organization: Nubeat Communications, Milwaukee, WI
Lines: 22

Greetings!

We have SCO XENIX 386 2.3.2 and I have been asked to install it on an 
NCR PC486/MC25.

Two questions:

1)	Does it run? I know ODT runs, but it's UNIX, not XENIX.

2)	How to copy the distribution disks to 3.5. I have 5.25" media.
	I believe I've copied all of the disks with 
	dd if=/dev/fd096ds15 of=/dev/fd1135ds18. The one problem I
	have is with the Installation Boot floppy (N1). It won't boot!
	I tried making a bootable disk with mkdev fd and dd'ing N1 to
	it to no avail.

Any tips would be greatly appreciated!

Marty Wiedmeyer

-- 
mort@dhump.lakesys.com 				uunet!marque!dhump!mort