Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!ub!ubvmsd.cc.buffalo.edu!v119l94u
From: v119l94u@ubvmsd.cc.buffalo.edu (Dennis G Crawford)
Newsgroups: comp.windows.ms
Subject: Re: HELP COM2 in Enhanced mode?
Summary: Can't use Term in 386 mode, but kermit works fine?
Message-ID: <43262@eerie.acsu.Buffalo.EDU>
Date: 30 Oct 90 05:37:04 GMT
References: <1266@ria.ccs.uwo.ca>
Sender: news@acsu.Buffalo.EDU
Reply-To: v119l94u@ubvmsd.cc.buffalo.edu
Distribution: na
Organization: University at Buffalo
Lines: 31
Nntp-Posting-Host: ubvmsd.cc.buffalo.edu
News-Software: VAX/VMS VNEWS 1.3-4.3

In article <1266@ria.ccs.uwo.ca>, johns@no3sun.uwo.ca (John Strybosch) writes...
>Kermit 2.30 works fine in Enhanced mode.

	Ugh!  I thought EVERYONE had upgraded kermits. Yuck!  2.3?!?!?!?
	go at LEAST to 3.01. <grin>
>  Term works fine in standard mode but not enhanced. 
>  Yes, I read the sysinix.txt readme files and I checked for the
>port addresses and interupts.  They seem to be correct.  I don't 
>have a COM3 or COM4 so they can't be conflicting.

	Hmmmmmmm.. My 386 in enhanced mode runs everything without a problem..
But, why would you want TERM to work.. try UNICOM, maybe.. I don't know
much else to tell you!

> 
>I have a 386 clone with AMI bios.  
> 

	AMI!?!  Double Yuck. Phoenix is MUCH better.  Upgrade. <grin>

Hope this has helped/not helped at all.

)_Dennis_(

----
:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:
:.:  V119L94U@UBVMS.CC.BUFFALO.EDU                         DGCRAWF@UMASS  :.:
:.:           UUNET!UBVMSC.CC.BUFFALO.EDU!V119L94U@UUNET.UU.NET           :.:
:.:  CRAWFORD@SUN.ACSU.BUFFALO.EDU          DGCRAWFO@SUNRISE.ACS.SYR.EDU  :.:
:.:  --Dennis G. Crawford                        University at Buffalo    :.:
:::::::::...There's nothing here but the same old song and dance...::::::::::