Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!bruce!monu1!vaxc!cie590l
From: hadgraft@civeng.monash.edu.au (Roger Hadgraft)
Newsgroups: comp.windows.ms
Subject: Re: Hypercard for Windows? - add to FAQ?
Message-ID: <64664.272fe36d@vaxc.cc.monash.edu.au>
Date: 31 Oct 90 22:57:17 GMT
References: <90302.224647MUHRTH@DB0TUI11.BITNET>
Organization: Civil Engineering, Monash University, Australia
Lines: 18

In article <90302.224647MUHRTH@DB0TUI11.BITNET>, MUHRTH@tubvm.cs.tu-berlin.de (Thomas Muhr) writes:
> Is there an environment capable of processing MacHypercard stacks
> without problems (as far as no problems is realistic for the MAC!)?   q
> Thank you-
> Thomas
>
Perhaps this should be added to the list of FAQs. Your best bet is PLUS from
SPINNAKER SOFTWARE. It also runs on the Mac and under OS/2, and is a superset of
Hypercard 1.

Other alternatives are ToolBook, and a conversion utility called ConvertIt,
although there have been comments that ConvertIt doesn't handle everything, and
WindowCraft.
--
Roger Hadgraft                  |  hadgraft@civeng.monash.edu.au
Lecturer in Civil Engineering   |
Monash University               |  phone:  +61 3 565 4983
Clayton, Vic. 3168. Australia.  |  fax:    +61 3 565 4944 or 3409