Xref: utzoo comp.binaries.ibm.pc.d:10265 comp.os.msdos.apps:560
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!sumax!halcyon!ralphs
From: ralphs%halcyon.uucp@seattleu.edu
Newsgroups: comp.binaries.ibm.pc.d,comp.os.msdos.apps
Subject: Re: Telix: Saving COMM parameters
Message-ID: <9ig6R1w163w@halcyon.uucp>
Date: 5 Nov 90 06:14:43 GMT
References: <0042@starsend.UUCP>
Organization: The 23:00 News
Lines: 17

floyd@starsend.UUCP (Floyd Miller) writes:

>     I'm starting to use Telix (v 3.12) to see how it will perform
> for direct-connect communications with a Unix workstation.  I need
> to have the COMM parameters (parity, number of data and stop bits)
> set to E-7-1 but Telix always seems to start up in mode N-8-1.

You might try stripping the high bit off the 8N1 setting in the
Alt-O menu.  You also might try editing the telix.cnf file for data=8,
parity="N" and stop=1 to 7, E, and 1, respectively.  I take it that
using the 'A' option in the Alt-O menu doesn't work?  When you finish
changing parameters, you have the option to save your settings.

--
  Users at CompuServe can receive mail if you replace the comma in
  their userid with a period and send to userid@compuserve.com.
  This helpful hint is brought to you courtesy of Tips 'R Us.