Path: utzoo!attcan!uunet!wuarchive!usc!ucsd!ucbvax!ANDREW.CMU.EDU!dl2n+
From: dl2n+@ANDREW.CMU.EDU (Daniel Edward Lovinger)
Newsgroups: comp.soft-sys.andrew
Subject: Re: VUI & Terminal Emulation
Message-ID: <IbBXAZC00WB9MSrXRa@andrew.cmu.edu>
Date: 6 Nov 90 03:51:01 GMT
References: <9011060005.AA11027@lternet.lternet.washington.edu>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 19

Rudolf Nottrott <rnott@lternet.washington.edu> writes:
> When accessing VUI over a dial-up connection, so far I have only been
> able to use a VT52 emulator (Procomm in VT52 setup).  Other emulators,
> such as H19 or VT100 would not work correctly.  

	The last  PD version of  Procomm had a  horribly  broken VT100
emulation  mode built into  it, and I'd bet  that is what your problem
is. The last time I had to use  a PC for  remote access  I  used Telix
3.12 without any emulation problems. You should be able to find a copy
on wsmr-simtel20.army.mil or grape.clarkson.edu (it's  a step up  from
Procomm in other regards as well).


					dan
					not ITC
					but I've had to deal with
						Andrew for the last
						three and a half
						years