Path: utzoo!attcan!uunet!zaphod.mps.ohio-state.edu!julius.cs.uiuc.edu!usc!ucsd!ucbvax!CCVAX.IASTATE.EDU!WHE46
From: WHE46@CCVAX.IASTATE.EDU (Marc Barrett)
Newsgroups: comp.sys.amiga.tech
Subject: Using an A500 HD on an A1000.
Message-ID: <0BDACC36271F60AE18@ISUVAX.BITNET>
Date: 5 Nov 90 18:50:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 21


   I own a TrumpCard 500 hard disk, and would like to use it on an Amiga
1000.  The problem is, I am confused about exactly how it should be 
plugged into the A1000.  Some people have said that the 86-pin edge
connector on the A500 is flipped both top-to-bottom and left-to-right
from the connector on the A1000, while others have said that it is only
flipped left-to-right.

   Could someone clear up, once and for all, exactly how the connectors
on the A500 and A1000 differ?  I do not really want to plug this hard
drive in wrong, and end up frying my A1000, TC500, or both.  I would
like to know exactly how I should plug the TC500 into the A1000 
(backwards and upside-down, or just backwards) without blowing either
the A1000 or TC500.

   BTW, I realize that some of the voltages on the A500 differ from
those found on the A1000, but this should not be a problem because
I am using an external power supply for the HD and these voltages are
not used.

                                   -MB-