Path: utzoo!attcan!uunet!sco!brianm
From: brianm (Brian Moffet)
Newsgroups: comp.sys.amiga.tech
Subject: Re: A1000 and Supra SCSI HD setup
Message-ID: <U=A.658095158@sco>
Date: 8 Nov 90 20:12:38 GMT
References: <7946@ucdavis.ucdavis.edu>
Sender: news@sco.COM
Lines: 23

auyeung@iris.ucdavis.edu (Tak [UlTech] AuYeung) writes:

>This is a follow-up of the previous article asking for help with a
>Supra SCSI HD setup that sometimes freezes my A1000.  According to the
>messages I have received so far, there are mainly three types of
>responses:

I have never had a software problem with My Supra setup on my old Amiga 1000.
However, I have had a freeze up or 2.  I have encountered this while running
the latest software from them (5.10? or 1.10? the one which supports
scsi_direct)  after I installed the Midget Racer with 68020.

I found what happened was I had blind reads set.  I looked into the
manuals and they suggested that I unset this if I have done anything
to my CPU speed.  While my 68020 is not running any faster, it does
have an internal Instruction cache, so I tried unsetting blind reads.

I have not had a problem since (almost 1 year now) with my amiga.

The system is Amiga 1000, Midget Racer w 68020/68881, Microbotics
Starboard 2, Alegra 2 Meg board.

brian moffet